How to Keep Your Vape System Squeaky Clean for Peak Performance

Regular cleaning is the most overlooked step in vaping, but it's essential for getting the purest flavor and extending the life of your coils. Here are the simple steps to keep your refillable tank or pod kit in top shape:

Part 1: Daily and Weekly Cleaning (The Basics)

These are quick maintenance steps you should do regularly.

1. Wipe Down the Drip Tip (Daily)

The mouthpiece (drip tip) collects residue, dust, and grime.

• Method: Use a clean, damp paper towel or a cotton swab to wipe the entire inside and outside of the mouthpiece.

2. Clean the Contact Points (Weekly)

The connection between your pod/tank and the battery (mod) often collects e-liquid residue that can interfere with charging and firing.

• Method: Power off your device. Remove the tank/pod and use a dry cotton swab or a folded paper towel to gently clean the contacts on both the bottom of the tank/pod and inside the battery connection area. This is especially important for pod systems.

3. Address Leaks Immediately

If you notice any e-liquid on the exterior of your tank or mod:

• Method: Wipe it down immediately with a tissue. E-liquid can seep into the device's electronics or buttons if left unchecked.

Part 2: Deep Cleaning the Tank (Every Time You Change Coils)

You should deep clean the tank or pod housing whenever you replace the coil (usually every 1 to 2 weeks).

1. Disassemble Completely

Take your tank apart piece by piece:

• Remove the glass section (if applicable).

• Remove the base/airflow ring.

• Remove the coil (if using a new coil, toss the old one now).

• Remove the top cap and chimney section.

2. Rinse with Warm Water

Rinsing removes the majority of old e-liquid residue and gunk.

• Method: Hold each piece (except the coil, which you are replacing) under warm, running water.

• Use your fingers to rub off any stubborn residue. Pay special attention to the threads and the interior of the chimney.

3. The Final Soak (Optional but Recommended)

For a truly deep clean, you can use a safe cleaning agent:

• Simple Soak: Soak the disassembled pieces (again, excluding the coil) in a bowl of warm water for 15-30 minutes.

• Advanced Clean: Add a tiny drop of dish soap (like Dawn) or use an ultrasonic jewelry cleaner for a professional-level cleaning. Make sure to rinse thoroughly if using soap.

  
  

4. Dry Thoroughly

Moisture is the enemy of a fresh coil!

• Method: Lay all the pieces out on a paper towel or microfiber cloth and allow them to air dry completely (at least a few hours, or ideally overnight).

• Use a dry cotton swab to make sure the tight, hidden areas (like the top of the chimney or the coil seat) are perfectly dry before reassembling.

Quick Tip for Coil Cleaning

If you are just changing the flavor and want to slightly "clean" a coil that's still relatively new:

• Method: Remove the coil, and hold it under warm running water for about 30 seconds. Gently shake out the excess water and let it air dry for a full 24 hours before re-priming and using it again. Note: This technique extends life only slightly and doesn't replace regular cleaning.

  
  

Regular maintenance not only keeps your vape working great but ensures the delicious flavor you expect from your premium e-liquids always shines through!